Utility equipment: Wireless network is scalable, flexible and simple

utility equipment utility tools utility supplies CommScope
Sponsored by

Utility supplies: When 80 percent of mobile connections are made inside buildings but only about two percent of the world’s commercial space is covered from the inside, clearly something has to change. That change is happening now, as CommScope introduces a completely new architecture for in-building wireless systems.

Unveiled by CommScope, the ION®-E is a unified wireless infrastructure platform designed around IT-based structured cabling architecture, making it friendly to both wireless operators and business enterprises alike. The flexibility, scalability and simplicity of the system resolve the issues associated with rapidly changing indoor coverage and capacity demands.

The ION-E brings together licensed wireless and power plus Gigabit Ethernet for Wi-Fi into one unified wireless network that can scale to building size and is technology and spectrum adaptive. Unlike any other offerings available today, it features multi-band, multi-operator and multi-technology capabilities and uses the standard IT structured cabling infrastructure common to most commercial buildings. The ION-E is currently available for operator trials in Europe with expected general availability in other regions in the second half of 2014.

“Overstating the impact of the ION-E will be hard because this system solves so many challenges at once,” said Morgan Kurk, senior vice president, Wireless, CommScope. “It combines the capability and flexibility of cloud RAN while making DAS simple and unifying the local area and wide area networks. This intelligent transport system can finally fulfill the promise of small cells.”

“Bottom line: the ION-E is not just another DAS -- it is unified wireless infrastructure, a whole new category that addresses the needs of both the enterprise building owner and the wireless operator,” added Kurk.

Trends in the enterprise market make supporting mobile devices in businesses imperative. Bring Your Own Device policies, increased concern about wireless security and the proliferation of smartphones have combined to make indoor systems mandatory. IT managers are often tasked with supporting both wired and wireless networks in the enterprise despite having limited training in RF.

Yet, of the approximately 30 billion square meters of commercial real estate in use today globally, only approximately 2 percent are currently covered with a dedicated indoor wireless network. That is a serious issue in a world that expects ubiquitous, reliable service for increasingly faster data rates.

The ION-E platform solves the biggest roadblocks to in-building wireless through simplicity, flexibility and scalability.

The ION-E simplifies implementation by using the structured cabling systems familiar to IT installers, along with providing a simple user interface for setup and configuration with minimal input.

Today’s modern buildings require flexibility to handle floor space layout changes, the relocation of users, or other changes that would require an extensive rework of the wireless system. As a multi-band, multi-operator and multi-technology platform, the ION-E employs a standard grid approach and supports on-demand software defined frequencies to flexibly adapt to changing requirements.

The ION-E platform easily scales to support buildings from 5,000 to 500,000 square meters. It is frequency agile and technology agnostic, eliminating the need for costly infrastructure and equipment upgrades.

The world lacks people who have RF design expertise. This limits the deployment of traditional distributed antenna system (DAS) networks at a time when deploying indoor networks within enterprise buildings is increasingly in demand. With the ION-E, CommScope has simplified and optimized a solution that empowers IT professionals to deploy these systems. For example, adding network capacity to meet changing usage patterns is achieved with a simple click-and-drag. The ION-E self-detects and self-configures its components, while sending alarm notifications when it detects network issues.

“Simple, scalable and flexible -- those three words capture the essence of the ION-E,” said Kurk. “IT people who are not as familiar with RF networks will find the equipment intuitive and simple while being able to scale the ION-E to any building and flexibly support any wireless technology.”

For more information about CommScope or other products, click here to go to Utility Products’ Buyers Guide.

Sponsored by
Most Popular Articles


May 2015
Volume 19, Issue 5

Utility Products Topics

Transmission & Distribution
                       Vehicles & Accessories
Tools & Supplies   Safety
Line Construction & Maintenance   Test & Measurement

How to deploy mobile forms + devices to speed up field service processes & reporting

Overcoming the pain points associated with any process is much simpler and more cost effective than you think. This webinar will detail the benefits of switching to mobile forms for field data collection and reporting.
We'll examine real use cases and ROI of integrating mobile forms within a given field service process, including for work orders, inspections, checklists and proposals.
A quick AT&T Mobile Forms demo will reveal the feature rich, user-friendly nature of the solution. You'll see why it’s a must-deploy to speed up data collection, eliminate invoicing/data entry lags and auto-generate/deliver insightful reports.



Industry Company Pages

Keep up-to-date with the latest news and articles from some of the prominent utility product companies and resources.


Everlast Substation signs

Everlast safety signs and Everlast Substation signs meet all ANSI and OSHA requirements and continue to be readable for the life of the substation. When most signs fail ours shine.

Everlast pole tags

Everlast pole tags for distribution poles have been used all over the world in this great earth's worst environment's proving it is the longest lasting product to use on pole's!

Swage Bus Accessories

Swage Bus Accessories use a compression technology process called "swaging" that enables installation of aluminum bus accessories without the need of a welder.