Protective clothing: M12 Heated Gear delivers all day heat for the work you do

protective clothing safety clothing safety products Milwaukee Tool
Sponsored by

Safety products: Milwaukee Tool will continue to expand their line of M12 Heated Gear as they begin their 5th Season this fall. The 2014 line includes a ground-up redesign of M12 Heated Jackets, the introduction of the M12 Realtree Xtra® Camo 3-in-1 Heated Jacket, and new M12 Heated Hoodie color options for on and off the jobsite.

Powered by M12 REDLITHIUM Battery Technology, Milwaukee® Heated Gear distributes heat across the chest and back to actively warm core body areas. Durable carbon fiber heating elements woven in between rugged exterior materials and thermal insulating liners generate and maintain heat to reduce the need for bulky layers. Three heat settings (High, Medium, Low) allow the user to select the right amount of warmth for all weather conditions. All M12 Heated Jackets, Hoodies and Hand Warmers are now fully machine washable and dryable for extended use.

Redesigned for optimal fit, better heat retention and improved versatility, the new Milwaukee M12 Heated Jackets feature an improved cut that provides an enhanced range of motion and keeps heat closer to the body. Now with a new two-tone color design, the rugged wind and water resistant shell keeps weather out, while improved insulation and a thermal fleece lining hold heat in to reduce the number of layers needed. For added versatility, two distinct heat zones (back and chest, lower pockets) can be adjusted independently to provide the right amount of heat for any situation, and an oversized cargo pouch and utility pocket have been added for storage. A USB charging power port conveniently charges all portable electronic devices, while displaying remaining run time for the battery. The new jackets will be available in Black, Red and RealtreeXtra® Camo, joining the Women’s and High Visibility Heated Jackets to round out the M12 Heated Jacket lineup.

Brand new this fall, Milwaukee® will also introduce the M12 3-in-1 Camo Heated Jacket. The most advanced heated jacket system designed for the outdoorsman, the customizable 3-in-1 Heated Jacket sets a new standard in cold-weather performance and versatility. Worn separately as a base layer or attached to the outer shell, the heated vest integrates five carbon fiber heating elements and advanced fabric-layering technology to distribute and maintain heat across core body areas. The rugged wind and water resistant shell features special noise-reducing fabric with the Realtree Xtra® Camo pattern to withstand the harshest outdoor conditions while blending in with the natural colors of the fall, winter and early spring. Made out of the same weather-resistant material, a removable hood helps keep heat in and provides additional protection against the elements when added to the shell.

With the versatility to provide warmth during fall, winter and spring months, the new M12 Heated Hoodies will include the addition of black as a color option, as well as two Realtree® camouflage patterns. Featuring noise-reducing fabric, Realtree Xtra® Camo works best in wooded terrain throughout all regions, and Realtree Max-1® Camo mimics the neutral earth tones found in the southwest, west and plains regions. The Red, Black and Gray M12 Heated Hoodies are made from a thick cotton blend that is built to withstand wear and tear on the jobsite. The High Visibility and new Camouflage hoodies feature a water-repellant polyester shell for protection from the elements. All feature a waffle-weave polyester thermal liner and rib-knit cuffs to provide superior heat retention in the coldest months.

On or off the jobsite, Milwaukee M12 Heated Gear provides up to 6 hours of continuous heat per battery charge for use in all seasons and outdoor environments. M12 REDLITHIUM Batteries are compatible with over 60 power tool solutions from Milwaukee.

For more information about Milwaukee Tool or other products, click here to go to Utility Products’ Buyers Guide.

Sponsored by

Get All the Utility Products News Delivered to Your Inbox

Subscribe to Utility Products or email newsletter today at no cost and receive the latest news and information.

 Subscribe Now


October 2015
Volume 19, Issue 9

Utility Products Topics

Transmission & Distribution
                       Vehicles & Accessories
Tools & Supplies   Safety
Line Construction & Maintenance   Test & Measurement

How to deploy mobile forms + devices to speed up field service processes & reporting

Overcoming the pain points associated with any process is much simpler and more cost effective than you think. This webinar will detail the benefits of switching to mobile forms for field data collection and reporting.
We'll examine real use cases and ROI of integrating mobile forms within a given field service process, including for work orders, inspections, checklists and proposals.
A quick AT&T Mobile Forms demo will reveal the feature rich, user-friendly nature of the solution. You'll see why it’s a must-deploy to speed up data collection, eliminate invoicing/data entry lags and auto-generate/deliver insightful reports.



Industry Company Pages

Keep up-to-date with the latest news and articles from some of the prominent utility product companies and resources.


Everlast Substation signs

Everlast safety signs and Everlast Substation signs meet all ANSI and OSHA requirements and continue to be readable for the life of the substation. When most signs fail ours shine.

Everlast pole tags

Everlast pole tags for distribution poles have been used all over the world in this great earth's worst environment's proving it is the longest lasting product to use on pole's!

Swage Bus Accessories

Swage Bus Accessories use a compression technology process called "swaging" that enables installation of aluminum bus accessories without the need of a welder.