AEP wins OK to spin off Ohio power generation assets

Sponsored by

American Electric Power (AEP) has received all necessary approvals to separate its AEP Ohio-owned generation assets from its Ohio distribution and transmission operations and complete transfer of that generation to AEP's competitive generation company (AEP Generation Resources Inc.) and regulated affiliates Appalachian Power and Kentucky Power.

The company received the final approvals from the Federal Energy Regulatory Commission (FERC) this week and expects to complete transfer of those assets effective December 31.

FERC accepted AEP's application to terminate the interconnection agreement, or pool, that exists among AEP's utilities in the Midwest; approved a new Power Coordination Agreement among Appalachian Power, Kentucky Power and Indiana Michigan Power; and approved other tariff and financing-related filings. AEP's applications for the generation transfers were approved by the FERC April 29.

About 11,200 MW of AEP Ohio-owned power generation will be transferred to AEP Generation Resources. AEP Ohio's two-thirds ownership of John E. Amos Plant Unit 3 (867 MW) will transfer to Appalachian Power, and 50 percent of Mitchell Plant (800 MW) will transfer to Kentucky Power. Following the transfers and expected retirements through 2015, AEP Generation Resources expects to own about 8,700 MW.

AEP received approval December 13 from the West Virginia Public Service Commission (West Virginia PSC) for Appalachian Power to acquire AEP Ohio's ownership of Amos Plant Unit 3. The Virginia State Corporation Commission (Virginia SCC) approved the Amos Unit 3 acquisition July 31.

The Kentucky Public Service Commission approved Kentucky Power's acquisition of 50 percent of the Mitchell Plant generation October 7. AEP plans to make additional filings in the first quarter of 2014 to address a deferred decision from the West Virginia PSC on the merger of Wheeling Power into Appalachian Power and the acquisition of the remaining 50 percent of Mitchell Plant by Appalachian Power.

The Virginia SCC approved the Wheeling Power merger but not the transfer of the Mitchell generation to Appalachian Power. Wheeling Power customers will continue to receive generation service through a FERC-approved agreement, which will transfer to AEP Generation Resources effective with the closing of corporate separation December 31.

Sponsored by

Get All the Utility Products News Delivered to Your Inbox

Subscribe to Utility Products or email newsletter today at no cost and receive the latest news and information.

 Subscribe Now


October 2015
Volume 19, Issue 9

Utility Products Topics

Transmission & Distribution
                       Vehicles & Accessories
Tools & Supplies   Safety
Line Construction & Maintenance   Test & Measurement

How to deploy mobile forms + devices to speed up field service processes & reporting

Overcoming the pain points associated with any process is much simpler and more cost effective than you think. This webinar will detail the benefits of switching to mobile forms for field data collection and reporting.
We'll examine real use cases and ROI of integrating mobile forms within a given field service process, including for work orders, inspections, checklists and proposals.
A quick AT&T Mobile Forms demo will reveal the feature rich, user-friendly nature of the solution. You'll see why it’s a must-deploy to speed up data collection, eliminate invoicing/data entry lags and auto-generate/deliver insightful reports.



Industry Company Pages

Keep up-to-date with the latest news and articles from some of the prominent utility product companies and resources.


Everlast Substation signs

Everlast safety signs and Everlast Substation signs meet all ANSI and OSHA requirements and continue to be readable for the life of the substation. When most signs fail ours shine.

Everlast pole tags

Everlast pole tags for distribution poles have been used all over the world in this great earth's worst environment's proving it is the longest lasting product to use on pole's!

Swage Bus Accessories

Swage Bus Accessories use a compression technology process called "swaging" that enables installation of aluminum bus accessories without the need of a welder.