Siemens installs two offshore platforms for TenneT in North Sea in July

Siemens has installed a fourth offshore platform in the North Sea, completing an important stage for grid connections of sea-based wind farms. This is the platform for the SylWin1 DC link, which is the most powerful of the four offshore wind power grid connections contracted to Siemens by the German-Dutch transmission grid operator TenneT between 2010 and 2011.
Sponsored by

Siemens has installed a fourth offshore platform in the North Sea, completing an important stage for grid connections of sea-based wind farms. This is the platform for the SylWin1 DC link, which is the most powerful of the four offshore wind power grid connections contracted to Siemens by the German-Dutch transmission grid operator TenneT between 2010 and 2011.

Only a few days prior to this, Siemens installed the third platform at sea for the HelWin2 grid connection.

In all, Siemens is implementing five North Sea grid connection projects for TenneT. The first four grid connections, whose platforms have been installed at sea, are scheduled to take up commercial operation successively between the second half of 2014 and the first half of 2015. The fifth grid connection, which was contracted earlier this year, is slated to go online in 2019.

"We have now erected four high-tech platforms for TenneT in the North Sea,” said Jan Mrosik, CEO of the power transmission and smart grid divisions at Siemens AG. “We succeeded in completing the first installation last year and erected the other three platforms in quick succession this year — an ambitious task as far as technology and logistics go. Once they have been commissioned, these grid connections will supply electricity from offshore wind power for around 3 million households.”

TenneT Germany in the past few days has erected two platforms that will provide some 1.5 GW of additional capacity for feeding offshore wind energy into the onshore transmission grid,” said Wilfried Breuer, offshore director at TenneT Germany.

“The German government has decided to increase the transmission capacity for offshore wind energy by 6.5 GW in the period until 2020,” Breuer said. “In 2015, two-thirds of that target will already have been achieved."

The newly installed SylWin1 platform with a capacity of 864 MW and located 70 km to the west of the island Sylt, after which the project was named, will concentrate the wind power produced by the three North Sea wind farms Dan Tysk, Butendiek and Sandbank and transmit the electricity to land.

This platform, with dimensions of 83-by-56-by-26 meters, is the largest converter platform installed to date worldwide. With its base frame, the platform weighs 25,000 tons. Only a few days before this, Siemens also erected the HelWin2 platform (690 MW) 35 km north of the island of Helgoland. The HelWin1 platform (576 MW) was installed in August 2013 adjacently. The BorWin2 platform (800 MW) was installed by Siemens in April 2014 northwest of the island of Borkum. These four grid connections will have a total transmission capacity of more than 2.9 GW, with enough wind power to supply some 3 million households. The fifth grid connection, BorWin3 (900 MW), which was ordered this year, is scheduled to supply wind power to 900,000 households starting in 2019.

Using the Siemens technology installed on the platforms, the AC power generated by the wind turbines is transformed into DC for efficient transmission onto land. At the associated land-based station, the electricity from the linked wind farms will be converted back into the AC power required for feeding into the grid.

Thanks to the low-loss high-voltage direct-current (HVDC) technology used there, transmission losses are less than 4 percent. The platforms are designed for decades of operation in the rugged North Sea and are fully automated. The platforms for the SylWin1, HelWin1 and BorWin2 projects were manufactured by Nordic Yards under contract by Siemens in the shipyards in Wismar and Warnemünde. The HelWin2 platform was constructed by the Dutch company Heerema. Petrofac, a general contractor active in the oil and gas industry, is responsible for the design, manufacture, transport and installation of the BorWin3 platform. The subsea and land-based cables for all of the projects were supplied by the Italian cable specialist Prysmian.

HVDC solutions and the associated service are part of the Siemens environmental portfolio. Some 43 percent of the company's revenues are provided by green products and solutions.

Sponsored by

Most Popular Articles


CURRENT MAGAZINE ISSUE

September 2014
Volume 18, Issue 8
file

Utility Products Topics

Transmission & Distribution
                       Vehicles & Accessories
Tools & Supplies   Safety
Line Construction & Maintenance   Test & Measurement

WEBCASTS

There is no current content available.

UTILITY PRODUCTS BUYERS' GUIDE

POWER INDUSTRY JOBS

Industry Company Pages

Keep up-to-date with the latest news and articles from some of the prominent utility product companies and resources.

BUYER'S GUIDE PRODUCTS

Meter Socket Converter

AE Product’s Meter Socket Converter (CNV) converts various Meter Forms to fit the desired application. 14S, 15S or 16S Socket to accept 2S Meter. Optional features available.

Service Disconnect Adapter with Electronic Meter Energizing

AEP’s Service Disconnect Adapter disconnects customer load but maintains power to the electronic meter. The meter maintains reading and communications links for AMR/AMI operations while only disabling the load side.

Meter Socket Jumpers - Perfect for Submetering Applications

AEP’s Meter Socket Jumper offers a safe and easy means of bypassing a meter socket. The Socket Jumper can be used with either Ringless or Ring style Meters.