eNewsletter
MagazinesFocus on Products
62.5 µm Optical FiberOFS Specialty Photonics Division has introduced a 62.5 µm core optical fiber, expanding on its HCS optical fiber family. The OFS fiber, cable and connector system — for use in generating stations, substations, and transmission/distribution lines — offers distinct advantages over copper. These include high bandwidth, which allows more data to be transmitted longer distances, immunity to EMI/RFI, more secure communications, lighter weight cables, and electrical isolation in the event of a ground fault.
This design combines the ruggedness of 62.5/200 µm (core/cladding) fiber with ease of connectorization in the field. The entire system is ideally suited for industrial environments, and the cable design is especially suited to installation environments with high pull forces. The 62.5 µm HCS fiber can be cabled and pre-terminated in the factory or field terminated with ST and SMA connectors quickly, reliably and cost-effectively, with minimal training, using the OFS “crimp and cleave” process. It offers a 125°C temperature rating, high proof test level, and superior resistance to moisture.
Web site: http://www.specialtyphotonics.com
BAP 236R-EH SeriesAbsopulse Electronics’ BAP 236R-EH Series is a rugged, plug-in (Eurocard) DC/DC converter designed for railway and other harsh environments. This 200W unit utilizes field-proven topology to deliver any DC output up to 130Vdc. It can be operated from supply voltages of 24Vdc ((14.4–37V), 36Vdc (22–55V), 48Vdc (28V-74V), 72Vdc (42V-110V), 96Vdc or 110Vdc (57V-168V). Other inputs are available on request. A built-in redundancy diode allows for parallel connection to achieve higher output power or N+1 redundancy.
The BAP 236R-EH is designed to meet the requirements of EN 55022 Class B EMI and EN 50121-3-2 (EMI and EMC). The series is rated for operation over a -25 to +70oC temperature range without derating, with natural convection cooling. It features full electronic protection on the input and output, an optocoupler alarm output and optional control input.
This compact plug-in module measures 3U x 14HP x 220mm and is typically used in 19” rack-mount applications. The BAP 236R-EH is heavily ruggedized and conformal coated and designed to meet IEC 61373 Categories 1 A & B shock and vibration standards.
Web site: http://www.absopulse.com
EZ Stop II Tie-back Lanyard with Rebar HooksDBI-SALA, a Capital Safety brand, introduces the EZ Stop II Tie-back Lanyard with rebar hooks. The new ANSI Z359.1-2007 rebar hooks feature 3,600-lb gates, allowing them to be used in tie-back applications with a floating D-ring, giving the user greater versatility on the job.
The EZ Stop II is available in a single or twin-leg tie-back model with a standard snap hook, aluminum rebar hook, flat steel rebar hook or carabiner ends. A floating D-ring provides an adjustable tie-back point so the lanyard can be used around various structures at a job site. The EZ Stop II lanyard utilizes a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs. Abrasion resistant tubular webbing covers an additional layer of polyester web, for the ultimate in durability.
Prior to the introduction of ANSI Z359.1-2007 compliant snap hooks, large rebar hooks were not approved for tie-back applications. Connection of rebar type hooks with large gate openings to standard size D-rings is not restricted with the new 3,600-lb gated snap hooks, provided the snap hook or carabiner is free to align with the applied load as intended.
The EZ Stop II Tieback Lanyard with rebar hooks meets all applicable industry standards, including OSHA and ANSI Z359-2007.
Web site: http://www.capitalsafety.com
Fiber Optic Distributed Strain and Temperature SensorOZ Optics now offers the Foresight series of fiber optic distributed strain and temperature sensors. The new sensor system provides high resolution and accurate strain and temperature monitoring over very long distances. The sensor uses standard optical telecommunications fiber, thereby leveraging the enormous economies of scale from fiber optic communication networks. Brillouin sensors are excellent for detecting corrosion, buckling and micro cracks in large structures.
The new Fiber Optic Distributed Strain and Temperature Sensor (DSTS) uses Brillouin scattering in optical fibers to measure changes simultaneously in both temperature and strain along the length of a standard, low-cost optical fiber. By wrapping or embedding a fiber inside a structure, users can detect when the structure is being strained or heated/cooled and allow the problem to be corrected before failure occurs. The sensing fiber can also be used for telecommunications.
The sensing technology gives both temperature and strain readings along the length of the fiber, with spatial resolution as short as 5cm.
The system is fully compatible with the communications and monitoring solutions found in OZ Optics’ Optical Network Safeguard (OZ-Guard) system. Escalating alarms, starting with the field engineer and rising to any level specified by the system operator, are a standard feature of the system.
Web site: http://www.ozoptics.com
HVI TeleLite System SolutionIn order to cost-effectively and rapidly deploy its TeleLite Fiber Optic isolation and protection solution in small applications, Positron announces that it has added the compact High Voltage Interface (cHVI) solutions to its Fiber Optic Isolation Portfolio. The cHVI product portfolio is designed to reduce the Cost of Ownership and improve operational flexibility.
TeleLite now has an expanded range of new products to include 2- and 3-card outdoor enclosures, pedestals and solar powering options as well as a 1U 2-slot indoor shelf. They are designed to meet all applicable IEEE recommendations and FCC standards for High Voltage isolation installations.
The 2-card and 3-card enclosures are designed for the Copper Fiber Junction (CFJ) and meet IEEE 1590 recommendations and include terminal blocks, facility protection options and additional space for auxiliary equipment. Mounting options include H-frame, pole-mounted and outside plant pedestal. They are also available with solar panel powering for CFJ sites, which do not have access to local hydro powering.
The 1U 2-slot Optical Equipment Interface (OEI) shelf is ideal for smaller isolation applications providing a cost-effective solution that mounts in a standard 19” or 23” telecommunication rack.
The new products are designed to facilitate ease of installation, field maintenance, and provide the needed flexibility to use the full portfolio of TeleLite plug-in cards for use in small applications. This assures interchangeability across all the TeleLite HVI and cHVI configurations.
Web site: http://www.positronpower.com
Micro Duct Fiber Optic Cable BlowerThe new Condux Micro Duct Fiber Optic Cable Blower is compact, powerful and portable. The Blower is ideal for last mile and micro fiber installations. It installs fiber optic cable into innerduct at speeds approaching 300’ per minute.
The blower features a hinged air block, conduit clamp and belt tractor drive. It accommodates cable diameters from 0.23” to 1.13” into 0.40, 0.48, 0.56 and 0.64 inch micro ducts innerduct outside diameters from 0.98” to 1.97”.
Web site: http://www.condux.com
Model 12628 Telescopic Crane and T-Max II BodyStellar Industries, Inc. is introducing the Model 12628 telescopic service crane. This new 66,000 ft-lb crane boasts a maximum hydraulic reach of 28’6” and can lift up to 12,000 lbs at 5.5’. It features a hexagonal boom design for reduced flex and increased strength, and it offers a variable speed, multi-function radio remote control as a standard feature.
In addition to the 12628 crane, Stellar has designed a new mechanic truck body to accommodate this new crane. This Stellar T-Max II body uses the same Torsion box understructure, Torq-Isolator crane compartment and E-coat primer as standard Stellar bodies. It features 60” high, 22” deep compartments with double panel doors, stainless steel hinges and door handles.
Web site: http://www.stellarindustries.com
New Line of Insulated ToolsWiha Tools has introduced new 1000Volt Insulated Wrenches, L-keys, Knives, Cable Cutters and Sockets. Wiha’s new line of insulated tools are safety tested. Insulation is certified according to EN/IEC 60900, ASTM F1505, NFPA-70E.
Safety tests include:
- Insulation visually inspected for appearance and integrity;
- Insulation tested for puncture penetration & low temperature impact resistance;
- Insulation is tested for adhesion to make sure it is properly applied to the tools when kept in a temperature of +70O C; and
- The insulating materials are also flame retardant in order to prevent risk from fire or spark over.
Each Wiha Insulated tool is tested and certified to 10,000 volts AC / 1500 volts DC and meets OSHA requirements for use in applications where safety insulated tools are called for.
Web site: http://www.wihatools.com
Pipe EelARNCO Corp. offers its Pipe Eel heavy-duty cable pulling system as a part of its extensive line of rodder systems. The Pipe Eel is compact and lightweight for easier handling and storage, and is ideal for outside plant applications.
The Pipe Eel uses high-strength Polykat fiberglass rod in 3⁄8” and 7⁄16”, and is available in lengths up to 500’ in a 30” cage and 1,650’ in a 40” cage respectively. The Polykat fiberglass rod provides high push force stability and flexibility, and has a smooth polypropylene coating for fast, easy placement with less friction. In the event of a break, the rod can be repaired simply and quickly by the user with the supplied rod ends or splices, and dowel pins. An optional length counter is available for easy measuring.
Constructed of galvanized steel tube, the Pipe Eel cage has a torsion-free design, assuring long life in the toughest of conditions. The cage has special bearings, allowing it to be easily moved by one person.
Web site: http://www.arncocorp.com
RearSight Back-up Camera SystemRostra Precision Controls Inc. introduces a new RearSight back-up camera system specifically designed for use in fleet vehicles.
The RearSight kit (#250-8040) features a 5” TFT-LCD monitor that mounts directly in the vehicle’s headliner to display with a large, wide angle view for drivers. The monitor has a reverse override function as well as dual video inputs for navigation, interior camera and/or DVD.
A heavy-duty, waterproof color image camera provides a 150-degree wide-angle view behind the vehicle that is transferred to the in-cab monitor. The camera features auto infrared for night vision and a heavy duty bracket with a 5’ harness, which allows users to easily adjust the camera’s angle.
Rostra offers a three-year/36,000 mile warranty on the new RearSight kit. Professional installation is recommended.
Web site: http://www.rostra.com
Super-Bright LED WorklightRugged LED reliability with ultra-white brilliance. That’s how Peterson Manufacturing describes its new, super-bright LED worklight designed for use on a wide range of working vehicles.
Listed as the Model 907, the new 4” round light is the latest addition to Peterson’s Great White LED line. Ten super-high-output white diodes paired with a custom fresnel lens produce its ultra-white brilliance in an even, round pattern with significant side light.
Peterson presents the M907 as an ideal replacement for standard PAR 36-type lights, offering several advantages in addition to the exceptional visibility it provides for worklight applications.
Vibration-resistant and hard-wired for durability, the M907 delivers 100,000-hour diode life and a low amp draw that is easy on vehicle electrical systems. All this while generating a light of exceptional intensity.
Peterson’s M907 is available in a durable, flexible rubber housing or separately for installation in a surface-mount bracket or traditional grommet mount in a standard 4.5” mounting hole.
Web site: http://www.pmlights.com
TruPulse 200 Rangefinder/HypsometerThis combination rangefinder/hypsometer features “thru-the-lens” viewing so you know laser energy is traveling directly along your line of sight. Because measurements are shown in the display, you never have to take your eyes off the target! Results are displayed in feet, yards, or meters. Distance measurements can be taken up to 3,280´ away without a reflective target. An integrated tilt sensor allows you to measure horizontal or vertical distance and calculate an object’s height instantly using the built-in two-shot routine. The “Closest” operating mode distinguishes near and far objects and identifies the closest target, and the “Farthest” mode allows you to lock on the farthest target and shoot distant features through brush and foliage. “Continuous” mode provides constant updates while locking on multiple targets. The TruPulse’s diopter adjustment allows for comfortable viewing even for eyeglass wearers. The TruPulse is water and dust resistant, features an RS 232 serial port for easy data downloading, and comes complete with a carrying case, lens cloth, neck strap, and manual.
Web site: http://www.forestry-suppliers.com
