Charlotte, N.C., April 18, 2011 — The Babcock & Wilcox Co. and its consortium partner, BE&K Construction Co., have been awarded a contract worth more than $668 million to engineer, design, procure and construct a new, waste-to-energy power plant for the Solid Waste Authority of Palm Beach County in West Palm Beach, Fla.
B&W also was awarded a contract to provide operation and maintenance services for the new facility. The first 10-year phase of the 20-year O&M agreement is valued at about $235 million.
B&W and BE&K will share the design and build work scope, while B&W will exclusively perform the O&M services. The SWA will release the consortium to begin the design and limited procurement this year, with full release scheduled in 2012.
B&W will design and supply three mass burn boilers capable of generating up to 95 gross MW of electricity, grates, ash systems, metals recovery systems, emissions control equipment — including a dry flue gas desulfurization unit, baghouse, carbon injection and selective catalytic reduction system — duct work and other components. BE&K will provide the balance of plant equipment and construction services.
The facility, once complete, will be capable of processing 3,000 tons of municipal solid waste per day to produce electricity and significantly reduce the amount of waste sent to the county's landfill. The project scope includes the installation of a metals recovery system to maximize the recovery and recycle of aluminum, steel and other metals.
The new plant is to be located on 24 acres adjacent to the SWA's existing waste-to-energy plant, the Palm Beach Renewable Energy Facility No.1, which also was designed, built and has been operated by B&W for more than two decades.
The project is expected to create the equivalent of 325 full-time construction jobs in West Palm Beach, with more than 900 people to be employed during some phases of construction. When operational, the new plant will employ 64 permanent, full-time workers.
B&W engineering, technical and support personal are expected to begin design work in Barberton this month. Furnace wall panels, boiler pressure parts and various components are targeted for fabrication in B&W's North American plants. The waste-to-energy plant is scheduled for commercial operation in spring 2015.