OpenADR 2.0a smart grid standard verified
The OpenADR 2.0 technology is based on the OASIS and builds on the successful OpenADR 1.0 specification supported by more than 60 organizations worldwide
Morgan Hill, Calif., April 25, 2012 —The OpenADR Alliance, a nonprofit corporation created to foster the development, adoption and compliance of a smart grid standard known as Open Automated Demand Response (OpenADR), announced the successful testing of the first servers and clients based on the OpenADR 2.0a profile standard.
Using the new OpenADR Test Tool developed by QualityLogic, OpenADR members Akuacom, a unit of Honeywell; EnerNOC, IPKeys Technologies and Universal Devices successfully tested their client and server devices, helping to further refine the standard and increase its ability to lower the cost, improve the reliability and accelerate the speed of automated demand response implementations for the smart grid.
The smart grid — digital networks connecting utilities, power-delivery systems and buildings — is designed to eliminate the overtaxing of the power grid. The OpenADR 2.0 technology is based on the Organization for the Advancement of Structured Information Standards (OASIS) and builds on the successful OpenADR 1.0 specification supported by more than 60 organizations worldwide.
Through the OpenADR 2.0 standard, the OpenADR Alliance will provide utilities, independent system operators (ISOs), regulators and controls suppliers with a selection of certified products for cost-effective demand response implementation.
The process of finalizing the OpenADR standard involves the qualification of the initial implementations and the validation of the test harness. Both objectives were met using the now validated OpenADR 2.0a test tool. The test event involved three virtual end nodes (VENs or client implementations) and two virtual top nodes (VTNs or server implementations).
All products passed extensive testing from more than180 test cases. Upon release of the final test tool, Intertek — the official test service provider — will initiate certification testing using the validated test harness to run tests on candidate devices.
The test event was held in Knoxville, Tennessee, coinciding with the Automated Demand Response and Ancillary Services Demonstration Project kickoff meeting hosted by the Electric Power Research Institute (EPRI). The utilities, ISOs and regulators participating in the EPRI event were able to get a preview of the first OpenADR 2.0a compliant products during the test event.