Power line construction: Terex Texoma Spiral Bullet Tooth Auger offers powerful production

Watertown, SD—For power line construction and more, Terex® Texoma Spiral Bullet Tooth Auger offers digger derrick operators powerful production in virtually all ground conditions. It is designed with a unique tooth pattern that distributes the cutting action evenly. In many cases, a digger derrick equipped with this auger can drill in conditions that previously required a pressure digger.

The cutting pattern on Terex Texoma Spiral Bullet Tooth Auger is designed to allow each tooth to cut a small track to increase cutting efficiency and tooth life. The cut pattern and tooth attack angle combine to make the bullet teeth act like "fingers" that penetrate through and lift up fractured or broken material.

“Competitive models are designed so the outside teeth do the majority of the work, while the inside teeth do very little. This type of design limits production to the teeth cutting the most material,” says John Pantzke, project manager, Terex Utilities. “The Terex Texoma Spiral Bullet Tooth Auger equalizes the work done by each tooth on the cutting tool. The spiral bullet tooth design on our auger offers increased production rates while reducing tooth wear.”

The Terex Texoma Spiral Bullet Tooth Auger can be used in virtually any ground condition, with all of the standard Terex tooth offerings and is adaptable to any size of digger derrick truck. Flighting thickness and pitch options are available for this auger. Terex also offers its customers custom specifications on all its auger tooling upon request.

A product demonstration video of the Terex Texoma Spiral Bullet Tooth Auger can be found at: http://www.youtube.com/watch?v=hkuPfLQkeA4.

For more information about Terex or other augers, click here to go to Utility Products’ Buyers Guide.Featuring a tooth pattern that distributes the cutting action evenly, the Terex® Texoma Spiral Bullet Tooth Auger offers digger derrick operators powerful production in virtually all ground conditions.

Content Dam Up Online Articles 2013 01 Terex

Watertown, SD—For power line construction and more, Terex® Texoma Spiral Bullet Tooth Auger offers digger derrick operators powerful production in virtually all ground conditions. It is designed with a unique tooth pattern that distributes the cutting action evenly. In many cases, a digger derrick equipped with this auger can drill in conditions that previously required a pressure digger.

The cutting pattern on Terex Texoma Spiral Bullet Tooth Auger is designed to allow each tooth to cut a small track to increase cutting efficiency and tooth life. The cut pattern and tooth attack angle combine to make the bullet teeth act like "fingers" that penetrate through and lift up fractured or broken material.

“Competitive models are designed so the outside teeth do the majority of the work, while the inside teeth do very little. This type of design limits production to the teeth cutting the most material,” says John Pantzke, project manager, Terex Utilities. “The Terex Texoma Spiral Bullet Tooth Auger equalizes the work done by each tooth on the cutting tool. The spiral bullet tooth design on our auger offers increased production rates while reducing tooth wear.”

The Terex Texoma Spiral Bullet Tooth Auger can be used in virtually any ground condition, with all of the standard Terex tooth offerings and is adaptable to any size of digger derrick truck. Flighting thickness and pitch options are available for this auger. Terex also offers its customers custom specifications on all its auger tooling upon request.

A product demonstration video of the Terex Texoma Spiral Bullet Tooth Auger can be found at: http://www.youtube.com/watch?v=hkuPfLQkeA4.

For more information about Terex or other augers, click here to go to Utility Products’ Buyers Guide.

More in Line Construction & Maintenance