Work Light – Technician’s professional Li-ion LED work light
Safety lighting: The Maxxeon WorkStar 3000 Technician's Professional LED Work Light is a handheld, cordless, Li-ion rechargeable light.
Work light: The Maxxeon WorkStar® 3000 Technician's Professional LED Work Light is a handheld, cordless, Li-ion rechargeable light. It features a long a powerful 700 lumen wide beam COB LED front work light, plus there is a handy narrow beam penlight LED on the top surface. A nylon hook swivels out the back of the body, allowing the light to be positioned as required. A sturdy hinge, which rotates 180 degrees with 7 indented positions, is built into the lower part of the body, so the 2 lights can be aimed in any direction.
Front Light: The 6 W COB LED has 3 brightness settings. The HIGH setting produces 700 lm with a run time of 2 hours, the MEDIUM setting is 350 lm for 4 h and LOW setting is 175 lm for 7h. The LED color is daylight white at about 5800K with CRI>75. The beam ratio is 1.5:1, which means the diameter of the beam is 1.5 times the distance from the light to the object or in other words, a wide beam. Just as important, the beam is consistent over the entire beam diameter, no hot spots, dark spots or rings.
Top Light: The 3 W Cree LED on the top of the light produces 150 lm and has a run time of 7 hours. The LED color is daylight white at about 5800K with CRI>65. The beam ratio is 1:2, which means the diameter of the beam is one half the distance to the object which for a "penlight" is a narrow beam.
Battery Indicator: Like its big brothers in the LUMENATOR® series, the Technician's Work Light features an innovative battery indicator that works both during charging and while the light is operating. Three green LEDs are arrange in a bar graph format, so the status of the battery is never a mystery.
Charging: The WorkStar® 3000's 18650 Li-ion battery is charged via a micro USB jack, so it can be charged in a vehicle or anywhere there is a USB port. A small wall plug with USB output is included. The battery should last for many years in normal operation. It is user replaceable and replacement batteries will be available on our Buy Parts Now page.
Body: The body is made from ABS and has soft rubber coating that provides a secure grip. The 2 main features of the body are the hinge and the magnetic base. The body tilts 180 degrees in 7 indented positions, so the 2 lights can be aimed as necessary. The powerful, rubber covered magnetic base works in conjunction with the tilting body and the wide beam to provide superior hands-free operation. It's only 9 in long and weighs less than pound. With an IP65 rating it is water resistant to water jets and rain. With an IK07 impact test and 6 ft drop test ratings, it is a dependable, professional tool.