Safety products: Prevent accidental machine re-starts following power interruptions

Safety equipment: Rockford Systems’ Sensing-Saf-Start protects machine operators from accidental re-starts following power interruptions. Anti-restart protection required by OSHA.

Content Dam Up En Articles 2017 09 Safety Products Prevent Accidental Machine Re Starts Following Power Interruptions Leftcolumn Article Thumbnailimage File

Safety products: 120V machinery can abruptly shut down during operation due to a power interruption. When an unintentional shut down takes place, it is critically important that a machine does not automatically restart, catching the operator by surprise and leading to a serious accident.

Sensing-Saf-Start® motor controls from Rockford Systems LLC help industrial users achieve higher levels of safety by preventing accidental machine start-ups after a voltage drop or power interruption. In the event of a power interruption, the Sensing-Saf-Start automatically disconnects power to the machine, so that when it is restored, the machine will not start up even if the power switch is in the "ON" position. It is only after the reset button has been pressed by the machine operator on the Sensing-Saf-Start that the machine can be restarted and normal operation resumed.

Extremely simple to install, the Sensing-Saf-Start instantly upgrades older machines to the latest safety standards, sparing the user the expense of purchasing a new machine. They are also ideal for replacing old, frayed or ungrounded power cords. The Sensing-Saf-Start is for use with equipment driven by small motors operating on 120V AC, and that are connected to a power source by means of 14 gauge, 3 wire flexible cord.

The Sensing-Saf-Start can be purchased as a package (SAFS-200) that includes a 120V AC Sensing-Saf-Start® with a 20" cord for the machine end and an 8' cord with molded plug on the power end, plus an E-stop in a NEMA-4 polycarbonate enclosure. Or the Sensing-Saf-Start can be bought individually (SAFS-100) without the E-Stop.

The Sensing-Saf-Start complies with OSHA requirements, the Canadian Electrical Code, and NFPA 79 and ANSI B11 series electrical standards.

Headquartered in Rockford, Illinois, Rockford Systems, LLC delivers innovative machine safeguarding solutions for organizations working with industrial machinery. As a trusted adviser since 1971, Rockford Systems helps organizations interpret and apply complex Occupational Safety and Health Administration (OSHA) regulations and American National Standards Institute (ANSI) machine safety standards for a broad array of industrial applications. In addition, Rockford Systems provides complete Turnkey Machine Safeguarding Solutions, including machine safeguarding assessments, machine risk assessments, customized build-to-spec integration, over 10,000 safeguarding products, expert installation services, training and technical support, and ongoing compliance validation. Rockford Systems has improved the profitability of many of North America's largest companies by increasing compliance, reducing worker risk, enhancing productivity and decreasing costs.

For more information about Rockford Systems or other products, click here to go to Utility Products’ website. Or visit our Industry News and Equipment Showcase e-newsletters.

More in Test & Measurement