Bullet Tooth replacement kit speeds up bit changes

Removes conical auger teeth in a fraction of the time normally required

Augertech Bit Replacement Kits

Auger Technologies introduces an Auger Bit Replacement Kit which includes the innovative Bullet Tooth Puller to quickly and safely remove even the most stubborn conical auger bits, as well as a driver to re-install new bits without micro fracturing. With tools to both remove worn auger bits and replace new ones, the Bullet Tooth Replacement Kit drastically reduces the time required to change conical bits, thus reducing downtime and labor costs. Ideal for Kennametal-type bullet teeth, these kits speed the bullet tooth replacement of bits on drilling and boring augers, mining machinery, asphalt grinders, and more. Kits are available for standard .865 bits (part #9055) and for .990 bits (part #9060), to suit most drilling, boring projects.

Bullet Tooth Puller Quickly Removes Even Stubborn Bits

Powered either manually or with an impact wrench (not provided), the Bullet Tooth Puller removes conical auger teeth in a fraction of the time normally required, saving time and money. Augers with worn teeth that are stuck fast, can be efficiently removed in just minutes, so that when new bits are installed, a valuable asset is removed from the “bone yard” and returned to a productive state. Ideal for any auger with standard conical bullet teeth. 

Simply fit the split-ring Bullet Tooth Puller collet over the conical auger bit, then slide the driver arm over the collet, locking it in place. Drive the extractor screw which in turn backs out the tooth. Once out, reverse the motion on the extractor screw to remove the tooth from the collet. Can be used with an impact wrench (recommended – not supplied) or manually with a wrench. Either method eliminates the knuckle-busting methods previously employed when using fork wrenches or other methods.

Video of the Bullet Tooth Puller in action can be viewed at http://augertech.net/tooth-extractor/.  It is ideal for use with all standard conical teeth and augers. 

Driver Reinserts Bits Quickly and Safely

A cast iron driver tool allows fast and safe re-insertion of auger bits with no damage to the carbide. The conically shaped working end of the driver fits onto the exterior surface of the bit casings for either .865 or .990 bits. Tapping the strike-plate drives the bit into its holder for a secure fit without the micro fracturing that commonly occurs when hammers are used to tap auger bits into their housings. Elimination of micro fracturing extends the service life of the auger bits and maintains their productivity. Auger Bit Replacement Kits by Auger Technologies can return valuable working assets to the field faster than ever before, with less labor input. The driver is also available separately (part #9075).  

More in Tools & Supplies