New Generation Power Texas picks GE for wind turbine supply
Construction began in December 2013 and will be built out over two phases
Construction began in December 2013 and will be built out over two phases.
GE performed a mechanical loads analysis to determine the stability of the chosen wind turbines for the project. The collection of diagnostic data found that the GE 1.7-103 wind turbines were an ideal fit to produce optimum power output.
The GE wind turbines chosen for the Texas Wind Project by NGP are three-bladed, upwind, horizontal-axis wind turbines with a rotor diameter of 103 meters. The large rotor and advanced design with a hub height of 80 meters will help deliver optimum energy output.
Efficiency calculations estimated an annual net energy production of 1,784.2 GWh/year with a net capacity factor of 50.5 percent on the 30,000 acre wind farm located in northwest Dallas, Texas.
The 400 MW Texas Wind Project is expected to be fully operational before the end of 2015 to qualify for PTC.