Lowell Corp. now offers a full line of ratchet wrenches and accessories for tightening nuts on transmission towers. There are six wrenches and an impact socket in the line. Each of the rugged wrenches can handle either two or three of the most common transmission tower nut sizes, and, with a bolt-thru head, can handle nuts on any threaded length. By combining several tools in one, each wrench offers not only greater flexibility but also greater convenience. All tools are covered by a one-year guarantee.
There are three models in the Lowell 100T Series. Each has a permanent socket with three sizes that fit 3/4-in., 7/8-in. and 1-in. hardware as well as 1 1/2-in. hex nuts. The 103T has a 12-in. handle and weighs 2 3/4 lbs.; the 104T has a 15-in. handle and weighs 3 lbs.; and the 105T has an 18-in. handle and weighs 3 1/4 lbs.
There are two models in the 50T Series that feature double square socket openings to fit 7/8-in. and 1-in. hardware and 1 1/2-in. hex nuts. Handle lengths and weights are 15 in. for the Model #52 (4 1/8 lbs.) and 20 in. for the Model #53 (5 lbs.) Also available is a Model #152 with a 15 3/4-in. handle (3 3/4 lbs.).