Economical solution for installing electrical and mechanical systems

ERICO’s CADDY ROD LOCK system provides quick, economical solution for installing electrical and mechanical systems supported by threaded rod.

Solon, Ohio—CADDY ROD LOCK is a system from ERICO that provides a quick and economical solution for installing electrical and mechanical systems supported by threaded rod. The system includes the CADDY ROD LOCK beam clamp, channel nut and an anchor screw.

Beam clamp
• Works with slightly damaged threads and minor burrs on the threaded rod
• Reduces installation time up to 60 percent
• Load capacity up to 500 lbs (3/8 inch rod) or 2200 N (M10 rod)
• UL 203 and UL 2239 Listed, FM approved
• Electro-galvanized finish

Channel nut
• Works with slightly damaged threads and minor burrs on the threaded rod
• Reduces installation time up to 34 percent
• Load capacity up to 750 lbs (3/8 inch rod) or 3750 N (M8, M10 rod)
• Electro-galvanized finish

Anchor screw
• Works with slightly damaged threads and minor burrs on the threaded rod
• Reduces installation time up to 35 percent
• Load capacity up to 660 lbs (3/8 inch rod) or 2900 N (M8, M10 rod)
• FM approved (390010, CRLA37EG)
• Electro-galvanized finish

SN Series Nut—accessory for the CADDY ROD LOCK system
• Reduces the need for threading compared to standard nuts and washers
• Offers up to 50 percent installation time savings
• Ideal for retrofit projects, such as trapeze installations (simply add on as needed)
• Can be used on threaded rod with slightly damaged threads or minor burrs
• Electro-galvanized finish

With its "push-install" design, CADDY ROD LOCK simplifies the installation of threaded rod. Simply push the threaded rod through the mounting hole and it instantly locks into position. The features of the CADDY ROD LOCK system help reduce the installation time of threaded rods by up to 52 percent compared to conventional fasteners. The system also offers a 3:1 safety factor.

More in Tools & Supplies