Model G10S Bench Wire Twister

Eraser's Model G10S Bench Wire Twister is used for many diverse twisting needs.

Syracuse, N.Y.—Eraser's Model G10S Bench Wire Twister is used for many diverse twisting needs. The unit can twist pre-stripped stranded wires, twist strands of two or more wires together, twist wrapped shields on coaxial cables and tighten the twist of already twisted wire. Model G10S is supplied with one set of three twist length spacers to vary the twist length, depending on application needs. Twisting inserts can be ordered depending on wire size to be twisted.

Specifications are as follows:

WIRE SIZES:
• 12-18 AWG (2.06-1.02mmø)
• 18-24 AWG (1.02-0.51mmø)
• 22-26 AWG (0.64-0.41mmø)

TWIST LENGTH:
• Up to 1" (25.4mm) dependent on spacers used

TWISTED PAIRS:
• Not to exceed 2 18 AWG (1.02mmø).

THREE SIZE SPACERS:
• 1/2" (12.7mm) thick
• 1/4" (6.35mm) thick
• 1/8" (3.18mm) thick

POWER:
• 115V, 60Hz or 220/240V, 50Hz

For more information about Eraser or other wire twisters, click here to go to Utility Products' Buyers Guide.

More in Tools & Supplies