Fiberglass adhesive EP33 provides reliable bonding to a variety of different substrates
The cured fiberglass adhesive composition is a very good electrical insulator with high dielectric performance.
Hackensack, N.J., April 19, 2010—Master Bond fiberglass adhesive EP33 facilitates the reliable bonding of fiberglass to a variety of different substrates. It has been specially designed to overcome CTE mismatch complications. Curing at room temperature, it produces durable, high strength and tough bonds between fiberglass, wood, metals, vulcanized rubbers and many plastics. The cured fiberglass adhesive composition is a very good electrical insulator with high dielectric performance. It maintains a strength profile of 3,100 psi in shear, even after exposure to temperatures in the 205-235 C (400-450 F) range. Curing can be accelerated to as short as 1 hour at 95 C.
Master Bond’s fiberglass adhesive EP33 is very resistant to thermal cycling, high radiation levels and chemicals—including water, oil and most organic solvents. This combination of properties advocates EP33’s use in the electronic, electrical, computer, construction, metalworking, automotive and chemical industries. It is available in premixed bi-packs and cartridge/gun packaging for convenient dispensing as well as in standard pint, quart, gallon and 5 gallon containers.