Heat resistant epoxy adhesive
Master Bond Polymer Supreme 46HT-2 heat resistant epoxy adhesive for high performance structural bonding.
Hackensack, N.J., April 12, 2010—For high performance bonding strength to both similar and dissimilar substrates, Master Bond Polymer Supreme 46HT-2 is now available. This two-component adhesive features high temperature resistance along with superior toughness and strength. It has excellent durability, thermal cycling and shock capabilities, as well as superb electrical insulation properties.
With a balance of superior peel and shear strength properties, Supreme 46HT-2 is suitable for applications where long term exposure to wide temperature ranges between minus 100 degrees F and plus 500 degrees F is required. It is used extensively in aerospace, electronic, metalworking, transportation, appliance and chemical/oil processing applications.
With a mixing ratio of 100 to 30, it cures at elevated temperatures with a minimum 250 degrees F required for cure. Moreover, product properties are relatively unaffected by small changes in mix ratio. There is also a non-drip version available called Supreme 46HT-2ND2 that will not flow during cure. It is available for purchase in half-pint, pint, quart, one gallon and five gallon container kits.