SYDNEY, NOV 19, 2018 -- Retriever Communications, a global provider of mobile automation solutions for enterprises in the industrial space, recently announced the results of a study it commissioned with the University of Technology, Sydney (UTS) sharing deeper insight into the design of industrial-grade augmented reality (AR) software and hardware.
The joint study revealed that AR hardware is not ready to be implemented widely into industrial workspaces due to the following deficiencies:
• Headsets cannot be worn in the field for long periods of time
• Headset battery life is limited
• Difficult to use outdoors due to the glare created on the screen from the sun
As AR technology continues to evolve, there is a strong potential in the use of augmented reality to make field technicians more effective in their work and supported in their capabilities. While the following guidelines, developed on the basis of the study, enable developers to build applications that have higher adoption rates, the study also revealed that further work is necessary to ensure effective use in practice.
"Retriever Communications is excited to partner with UTS to take a deeper look at the current state of the use of augmented reality software and headsets in the industrial workspace," said Mary Brittain-White. "As these technologies continue to be adopted, we realize they need to be thoroughly tested in order to ensure industrial field workers are properly supported. We're confident that once more resources are implemented into fine tuning these devices, AR headsets will not only make work easier, but it will be safer as well."
This study was led by Associate Professor Andrew Johnston who notes "that the seven heuristics identified during the course of this study are meant to provide some high-level guidance for application developers. As the development process for augmented reality will continue to evolve, it's vital that we focus on the real-world needs of end users to ensure software meets the needs of field workers."
The key results of this study were:
1. Design for hands-free use so that field workers are able to access data while using their hands for manual work and communication
2. Allow workers to use their preferred device (mobile phone, tablet, headset or PC) when communicating with a (remote) augmented reality application user
3. Ensure that augmented reality technology integrates with and complements existing practices
4. Minimize information overload to prevent interference with situational awareness
5. Design for comfort when an application is intended for continued use
6. Provide technicians with convenient and accurate ways to provide input
7. Data entry should be structured so that it is gathered in a way that makes sense to end users rather than be based purely on back-end database structures
About Retriever Communications
A global expert in Field Service Management headquartered in Sydney, and with additional development and support in the U.S. and staff in Europe. For 20 years, Retriever has been partnering with clients to drive operational efficiency by mobilizing workforces, advancing delivery of service and improving asset management. Retriever provides off-the-shelf and bespoke mobile applications which are built to work in or out of coverage alongside a scheduling solution for efficient job planning, crew assignment and work-order planning. With a 100% deployment success rate, Retriever tailors and configures solutions for industries from Utilities to Environmental including field service maintenance, inspections, environmental testing, OH&S whilst integrating to GIS, Engineering and ERP systems.
The UTS Faculty of Engineering and Information Technology (FEIT) is a world-class faculty with a growing reputation for quality and impact. The faculty's research is highly advanced, industry-focused and part of the lively and rigorous research culture at UTS. Focused on 'practical innovation', FEIT researchers are pioneering research solutions with real-world impact. They're recognized leaders in their fields, responsible for delivering new, better and more cost-effective innovative solutions to current national and international challenges.