Transmission lines: Aerial spacer cable, polyethylene insulators, medium-voltage and high-voltage cable
Utility supplies: At IEEE PES T&D Conference and Expo, the Marmon Utility business units of Hendrix and Kerite will demonstrate their products and services for the electric utility industry.
Transmission lines: At the IEEE PES T&D Conference and Expo, April 16-19 at the Colorado Convention Center in Denver, the Marmon Utility business units of Hendrix and Kerite will demonstrate their extensive portfolio of products and services for the electric utility industry. At booth #4229, in addition to design, engineering and installation services, Hendrix and Kerite representatives will provide expert guidance on the use of aerial spacer cable, polyethylene insulators, and medium-voltage (MV) and high-voltage (HV) cable for transmission and distribution applications.
Hendrix Aerial Cable Systems are the superior option for 15kV to 69kV overhead conductor installations. Where reliability is a concern, Hendrix is ideal for challenging applications including long spans, environmentally sensitive areas and heavily wooded installations. For power systems exposed to harsh challenges such as falling trees, heavy ice and damaging storms, Hendrix Aerial Cable Systems are designed for strength, featuring three covered conductors supported by a heavy gauge messenger wire. The covered Aerial Cable Systems of Hendrix are also ideal for fire mitigation.
Hendrix Molded Products are lightweight polymer products that can withstand weather extremes, resist damage from impact, and are excellent alternatives to porcelain insulators. All Hendrix Polyethylene Insulators (HPI) are manufactured in the USA from a proprietary blend of track resistant, high-density polyethylene. Tie Top, Vise Top, and Line Post Insulators are tested in compliance with ANSI C29 specifications and exhibit superior electrical and mechanical characteristics as compared to wet process porcelain including greater leakage distance, higher flashover and impulse values and lighter weight. These vandal-resistant products are lightweight and won’t chip, crack or break, and are guaranteed for life.
Marmon Power Cable, Hendrix and Kerite provide electric utilities with a broad offering of medium- to high-voltage underground and specialty cable products, from 5kV to 138kV. Hendrix medium-voltage (MV) TRXLPE-insulated cable ranges 5kV to 46kV and is widely regarded as some of the most reliable underground distribution cable products on the market today. Conversely, Kerite MV cable utilizes discharge resistant (DR-EPR) insulated cable from 5kV to 46kV as well as PILC replacement cable. Kerite high-voltage (HV) underground and subsea cable products come in voltages from 15kV through 138kV for power transmission applications, and are engineered for the longest service life of any transmission cable. The most flexible in the industry, Kerite HV cable guarantees rapid, trouble-free installation and delivers excellent performance on power lines within substations, substation getaways, subsea, refinery and other industrial applications.
Solutions from Marmon Power Cable also include Kerite Cable Services for medium- and high-voltage underground installation projects, providing engineering, installation and maintenance solutions from a single point of contact, for services from procurement through installation and acceptance testing. Kerite provides project management, site surveys/system layout, custom cable designs, cable installation, splicing and terminating, system testing, and complete project documentation.
Also at the Marmon Utility booth during the show, Kerite will be hosting an open Cable Stripping contest on their DR-EPR cable. The combination of Kerite’s easy-to-strip insulation shield and our easy-to-remove insulation makes the preparation of Kerite cable, for termination or splicing, simple and fast. The ease with which Kerite cable can be prepared for splicing and termination contributes to the job being done properly and safely.
Utility company employees can stop by and try their hand at cable stripping, and competitors have a chance to win an Apple iPad.
About Marmon Utility
Marmon Utility is a solutions provider to the electrical power industry. Through its three business divisions operating under the Hendrix and Kerite brands – Marmon Utility offers a portfolio of products and engineering services that include medium- and high-voltage power cable, aerial cable systems, and molded polyethylene insulator products. Headquartered in Milford, NH, Marmon Utility is a Berkshire Hathaway company.
Marmon Power Cable
Kerite and Hendrix manufacture medium- and high-voltage electrical power cable (5-138kv) for utilities around the world. Both firms also provide a portfolio of engineering services that facilitate every aspect of cable projects, from system layout to installation to testing. Kerite is headquartered in Seymour, CT. Hendrix is based in Milford, NH. Both are business divisions of Marmon Utility, a Berkshire Hathaway company.
Hendrix Aerial Cable Systems
Hendrix designs, manufactures, installs, and services Aerial Cable Systems for domestic and international utilities. Hendrix Aerial Cable Systems provide a solution for utilities seeking to reduce outages, harden systems, protect wildlife, and increase the reliability of problem circuits. Headquartered in Milford, NH, Hendrix Aerial Cable Systems is a business division of Marmon Utility, a Berkshire Hathaway company.
Hendrix Molded Products
Hendrix Molded Products is known for the design and manufacture of high density polyethylene insulators and accessories, used to address different line/pole configurations that utilities around the world confront in the field. Offering utilities products such as line posts, vise tops and tie tops, Hendrix Molded Products is continuously seeking to provide utilities with innovative design and expertise. Based in Amherst, NH, Hendrix Molded Products is a business division of Marmon Utility, a Berkshire Hathaway company.